Switch vlan-mapping configuration example

Configuring vlan-mapping to achieve normal mutual access between PCs

PC1 is divided into vlan10 by S5560, and is mapped to vlan1000 by vlan mapping on port 1/0/15 passing S5130.

PC1: 192.168.200.1/24;

PC2: 192.168.200.2/24;

S5130's SVI1000 address is 192.168.200.3/24

ICMP packets are sent to cpu before vlan-mapping action

S5130 configuration:

#

interface GigabitEthernet1/0/15

port link-type trunk

port trunk permit vlan 10 1000

vlan mapping 10 translated-vlan 1000

#

interface GigabitEthernet1/0/16

port access vlan 1000

poe enable

#

S5500 configuration：

#

interface GigabitEthernet1/0/5

port link-mode bridge

port access vlan 10

#

interface GigabitEthernet1/0/6

port link-mode bridge

port link-type trunk

port trunk permit vlan 10

#

Experimental results:

1. PC1 can learn the arp of PC2 and SVI1000; can access PC2 normally

<S5130> dis arp

192.168.200.2 5cdd-70c1-ef51-GE2 / 6/1 20 D

192.168.200.3 741f-4a84-aae2-GE2 / 6/1 5 D

2. PC2 cannot access SVI1000 of S5130: ICMP packets are sent to cpu before vlan-mapping action