Does a fit AP have a console port? Can I log in from the console port to configure the AP?

2020-09-27 22:01:34 Published
  • 0 Followed
  • 0Collected ,1391Browsed

Problem Description

Solution

Yes. By default, fit APs do not have any configuration and do not need to be configured. For management purposes, you can log in and configure the AP before it is associated with an AC. To configure a fit AP from the console after it is associated with an AC, you must enable  the AP automatically disables the login function unless the function is enabled for the AP on the AC.

Please rate this case:   
0 Comments

No Comments

Add Comments: