How to check the MAC address of a certain radio on FAT AP?

2020-09-28 01:23:48 Published
  • 0 Followed
  • 0Collected ,1426Browsed

Problem Description

null

Solution

<FAT>dis wlan radio 2

Radio 2:

    BSSID                    

    State                     : Up

    Type                      : 802.11ac

    Antenna type              : internal

    Client dot11ac-only       : Disabled

    Client dot11n-only        : Disabled

    Channel bandwidth         : 20/40/80MHz

    Operating bandwidth       : 20/40/80MHz

    Secondary channel mode    : SCA

    Short GI for 20MHz        : Supported

    Short GI for 40MHz        : Supported

    Short GI for 80MHz        : Supported

    Short GI for 160MHz       : Not supported

    MIMO                      : Not Config

    Green-Energy-Management   : Disabled

    A-MSDU                    : Enabled

    A-MPDU                    : Enabled

    LDPC                      : Supported

    STBC                      : Supported

    Operational VHT-MCS set:

        Mandatory             : Not configured

        Supported             : NSS1 0,1,2,3,4,5,6,7,8,9



Please rate this case:   
0 Comments

No Comments

Add Comments: