Cannot modify the AP configuration generated by auto-ap?
2020-12-11 18:00:51
Published
- 0 Followed
- 0Collected ，1189Browsed
Problem Description
The system does not support modifying the AP service template in auto-ap mode.
The prompt is as follows:
[H3C]wlan ap auto_001
Info: AP is auto-configured-ap. Can not perform the operation.
Solution
Solution: Use the wlan auto-ap persistent command to convert the automatically generated "auto_001" into a permanent configuration and then modify it:
[H3C]wlan auto-ap persistent name auto_001