Switch between the main and standby ACs, the main AC cannot switch back
2020-12-16 00:09:00
Published
- 0 Followed
- 0Collected ，1243Browsed
Network Topology
mull
Problem Description
After the main AC failure is restored, the AP and Client are still connected to the standby AC and cannot automatically switch back to main AC.
Process Analysis
The AP priority configured on the main AC is not 7
Solution
Set the AP priority configured on the main AC to 7 (maximum value) . To make sure the priority configured on the main AC is higher than the other standby ACs. The specific configuration is as follows:
[Sysname]wlan ap AP1 model WA2620E-AGN
[Sysname-wlan-ap-ap1]priority level 7