The number of AP's can not be shown on the CloudNet

2021-03-11 00:50:20 Published
  • 0 Followed
  • 0Collected ,1498Browsed

Network Topology

NULL


Problem Description

We can see the amount of AC on the CloudNet, but the amount of AP is shown as 0 


Process Analysis

We can see the amount of AC on the CloudNet, indicating that AC has been managed by the CloudNet.I checked the status of AP on AC and found that they were all normal R/M status. Indicates a problem with data synchronization between AC and the CloudNet.


Solution

Oasis and AC are out of sync. By configuring NTP to synchronize the public clock, we can see the amount of AP on the CloudNet.

clock protocol ntp

ntp-service enable

ntp-service unicast-server time.nist.gov

clock timezone Beijing add 08:00:00


Please rate this case:   
0 Comments

No Comments

Add Comments: