Which configurations will affect the VLAN changes of wireless Layer 3 roaming terminal?

 Which configurations will affect the VLAN changes of wireless Layer 3 roaming terminal?

Wireless Layer 3 Roaming is designed to maintain the original business VLAN and IP address of wireless terminals during cross-VLAN roaming, ensuring uninterrupted service continuity.

If the wireless access point is configured on the AP, Layer 3 roaming may not be achievable, as the default access point is on the AC:

client association-location ap

Changing the cache table aging time to 0 may also lead to VLAN switching during roaming. By default, the aging time is 180 seconds. This configuration is usually used to ensure real-time VLAN switching after roaming.

client cache aging-time 0