The command to enable the IP source address verification of the wireless client

Null

For the wireless client, the ip verify source command is to enable the IPv4 source address verification function under the service template. When the AP receives the message sent by the client, it will search for the IP source address binding entry. If the feature item (MAC address + IPv4 address) matches a binding entry, and the client obtains an IPv4 address through DHCP, the packet is forwarded; otherwise, the packet is discarded. After configuring this command under the service template, how to view the binding entries?

null

Solution: For V5 devices:

display wlan client ip source binding;

display wlan client ipv6 source binding;

For V7 devices, you need to view it in the probe view:

[ac-probe] display system internal ip source binding;

[ac-probe] display system internal ipv6 source binding