The client cannot be associated under the new AP

null

The client cannot be associated under the new AP

 Debug wlan client analysis is collected on AC, AC can receive AUTH authentication message from terminal, and AC also replied. Then why is there no further interaction of association messages? Is it because the terminal did not initiate it or the AC did not receive it? By configuring local forwarding, local association and authentication, the fault disappears after configuration and the terminal associates normally. After testing again and changing the association point to AC, the fault immediately recurred. Through display fib, found that there is a static route of the next hop address corresponding to the interface is the management port of the AC, suspected that there is a relationship with this, consulting the site is indeed a new configuration of this route, the site deleted the static route failure disappeared.

Although this problem is manifested as a wireless client association problem, the actual or wired routing problem, the site to delete the new route problem is solved.