WA6338 The local forwarding terminal cannot obtain the address

WA6338 The local forwarding terminal cannot obtain the address

Due to local forwarding, the AP needs to pass through the map file to allow the terminal’s service vlan. After logging in to the AP, it is found that the G1/0/1 port has already released the terminal’s service vlan, but why the terminal still cannot obtain the address ? After viewing the installation guide of WA6338, there is still a Smart interface on the AP: 2.5GE/PoE+ corresponds to the SGE1/0/1 interface in the MAP file, and corresponds to the smartrate-Ethernet 1 interface in the AC configuration; GE/PoE_OUT corresponds to the SGE interface in the MAP file. The GE1/0/1 interface corresponds to the gigabitethernet 1 interface in the AC configuration. The on-site AP is connected to the 2.5GE port, so the configuration should be sent to the smartrate-Ethernet 1 port.

Solve after modifying the map file. If you encounter the same problem, you need to carefully check whether the interface of the AP is special when checking the map file.