Cloud AP Port Configuration Overridden

Traditional Cloud AP Networking

When the cloud AP is normally online, use the bulk template to change port g1/0/5 to a hybrid port, the configuration under the port will be automatically refreshed after a while.

1. After the AP goes online normally, it will get the place configuration automatically, the place configuration includes the port configuration, change the port g1/0/5 to hybrid port, after 2-3 minutes, the port will be updated to access port automatically and the port pvid configuration will be deleted.

2. Manually issue the bulk template again and configure it to issue successfully.

3. The next day the port configuration was refreshed again, and it was confirmed that due to Cloudnet"s configuration feature if you change the port type or configure the port pvid, the port configuration will be overwritten due to configuration synchronisation.

1. Currently this can only be circumvented by disabling the Cloudnet configuration synchronisation feature

2. Cloudnet will develop port-related configuration modules in the future, and port configurations will not be refreshed