WA6330 can't enter anchor mode

irrelevant

WA6330 can"t enter anchor mode 

The AP can not enter anchor mode after execute ap-mode anchor-ac.

[H3C]ap-mode anchor-ac

Changing working mode will reboot system. Continue? [Y/N]:y

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU...

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing....Done.

****************************************************************************

*                                                                          *

*                   H3C WA6330 BootWare, Version 7.18                      *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.

Compiled Date       : Nov 19 2021

Memory Type         : DDR4 SDRAM

Memory Size         : 1024MB

Flash Size          : 128MB

PCB Version         : Ver.B

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Loading the main image files...

Loading file flash:/wa6300-system.bin.......................................

....Done.

Loading file flash:/wa6300-boot.bin.........Done.

Image file flash:/wa6300-boot.bin is self-decompressing.....Done.

System image is starting...

Startup configuration file doesn"t exist or is invalid.

Performing automatic configuration... Press CTRL_C or CTRL_D to break.

Automatic configuration attempt: 1.

Not ready for automatic configuration: no interface available.

Waiting for the next...

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU...

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing....Done.

****************************************************************************

*                                                                          *

*                   H3C WA6330 BootWare, Version 7.18                      *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.

Compiled Date       : Nov 19 2021

Memory Type         : DDR4 SDRAM

Memory Size         : 1024MB

Flash Size          : 128MB

PCB Version         : Ver.B

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Loading the main image files...

Loading file flash:/wa6300-system.bin.......................................

....Done.

Loading file flash:/wa6300-boot.bin.........Done.

Image file flash:/wa6300-boot.bin is self-decompressing.....Done.

System image is starting...

Startup configuration file doesn"t exist or is invalid.

Line con0 is available.

Press ENTER to get started.

%Sep 20 00:03:48:905 2021 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.

dis wlan dev role

Current running mode: FIT AP.

Analysis process:

1.WA6XXX series AP are all three-mode (Cloud, Fit, Anchor) in one, so it should support to work in the anchor mode.

2.You need to check whether there are other controllers in the environment that can send capwap management frames. If any, the ap cannot be switched directly to anchor mode.

3.There may be a problem with the version. Refresh the version.

After check the environment, there is another AC on the same vlan, after change the ap to another vlan issue resolved.