S6800-54QF Unable IRF Stacking

Irrelevant

The two S6800-54QFs cannot be IRF stacked, and when doing IRF stacking prompts the

The port Ten2/0/1 can"t receive irf pkt, please check.
The Vxlan mode configurations should be the same on devices in one IRF.Please check them on the neighbor device connected to IRF-port 2

The S6800-54QF version information is as follows:

 H3C Comware Software, Version 7.1.070, Release 2612P06 Copyright (c) 2004-2019 New H3C Technologies Co., Ltd. All rights reserved. H3C S6800-54QF uptime is 0 weeks, 0 days, 0 hours, 29 minutes Last reboot reason : User reboot Boot image: flash:/s6800-cmw710-boot-r2612p06.bin Boot image version: 7.1.070, Release 2612P06 Compiled Sep 26 2019 11:00:00 System image: flash:/s6800-cmw710-system-r2612p06.bin System image version: 7.1.070, Release 2612P06 Compiled Sep 26 2019 11:00:00

1. Check that the IRF-bound ports and cables are all OK.

2. Check that the configuration of the IRF has specified the members, the ports are OK, and the IRF is active.

3. Using display hardware-resource, found that the hardware resource modes of the two stacked devices are different, with the following feedback:

dis hardware-resource
Switch-mode resource(switch-mode), all supported modes:
  0                 MAC table is 288K, L3 host table is 16K, LPM Table is 16K
  1                 MAC table is 224K, L3 host table is 80K, LPM Table is 16K
  2                 MAC table is 160K, L3 host table is 144K, LPM Table is 16K
  3                 MAC table is 96K, L3 host table is 208K, LPM Table is 16K
  4                 MAC table is 32K, L3 host table is 16K, LPM Table is 250K
  -----------------------------------------------
  Default         Current         Next
  0               0               0              
 
Routing-mode resource(routing-mode), all supported modes:
  ipv6-64           ipv6-64 supported
  ipv6-128          ipv6-128 supported
  -----------------------------------------------
  Default         Current         Next
  ipv6-64         ipv6-64         ipv6-64        
 
Vxlan resource(vxlan), all supported modes:
  l2gw              L2 gateway--underlay/overlay 48K/0K
  l3gw8k            L3 gateway--underlay/overlay 40K/8K
  l3gw16k           L3 gateway--underlay/overlay 32K/16K
  l3gw24k           L3 gateway--underlay/overlay 24K/24K
  l3gw32k           L3 gateway--underlay/overlay 16K/32K
  l3gw40k           L3 gateway--underlay/overlay 8K/40K
  border8k          Border--underlay/overlay 40K/8K
  border16k         Border--underlay/overlay 32K/16K
  border24k         Border--underlay/overlay 24K/24K
  border32k         Border--underlay/overlay 16K/32K
  border40k         Border--underlay/overlay 8K/40K
  -----------------------------------------------
  Default         Current         Next
  l2gw            border40k       border40k      

dis hardware-resource

Switch-mode resource(switch-mode), all supported modes:

  0                 MAC table is 288K, L3 host table is 16K, LPM Table is 16K

  1                 MAC table is 224K, L3 host table is 80K, LPM Table is 16K

  2                 MAC table is 160K, L3 host table is 144K, LPM Table is 16K

  3                 MAC table is 96K, L3 host table is 208K, LPM Table is 16K

  4                 MAC table is 32K, L3 host table is 16K, LPM Table is 250K

  -----------------------------------------------

  Default         Current         Next

  0               0               0              

 

Routing-mode resource(routing-mode), all supported modes:

  ipv6-64           ipv6-64 supported

  ipv6-128          ipv6-128 supported

  -----------------------------------------------

  Default         Current         Next

  ipv6-64         ipv6-64         ipv6-64        

 

Vxlan resource(vxlan), all supported modes:

  l2gw              L2 gateway--underlay/overlay 48K/0K

  l3gw8k            L3 gateway--underlay/overlay 40K/8K

  l3gw16k           L3 gateway--underlay/overlay 32K/16K

  l3gw24k           L3 gateway--underlay/overlay 24K/24K

  l3gw32k           L3 gateway--underlay/overlay 16K/32K

  l3gw40k           L3 gateway--underlay/overlay 8K/40K

  border8k          Border--underlay/overlay 40K/8K

  border16k         Border--underlay/overlay 32K/16K

  border24k         Border--underlay/overlay 24K/24K

  border32k         Border--underlay/overlay 16K/32K

  border40k         Border--underlay/overlay 8K/40K

  -----------------------------------------------

  Default         Current         Next

  l2gw            l3gw24k         l3gw24k    

One of them has a hardware resource mode of border40k and one of them has a hardware resource mode of l3gw24k, and it is not possible to IRF stack them with different hardware resources.

Just modify the hardware resource mode of one of them, refer to the following command:

[H3C]hardware-resource vxlan l3gw24k
Do you want to change the specified hardware resource working mode? [Y/N]:y
The hardware resource working mode is changed, please save the configuration and reboot the system to make it effective.

Take care to save the configuration after the modification is complete, and then reboot to complete IRF stacking.