How to customize iNode SSLVPN client on Mac IOS system?
2023-09-30 23:30:14
Published
- 0 Followed
- 0Collected ，2140Browsed
Network Topology
Null
Configuration Steps
Introduction：
This guide is for customizing iNode SSLVPN client, however, if you want to customize other function, the methods are similar, this guide may also provides some help.
First of all, download the iNode on the offical website:
https://www.h3c.com/en/Support/Resource_Center/EN/Network_Management/Catalog/H3C_iNode/iNode/
Then, unzip the software and install.
Select the iNode Manager.
Run the bash.
Get the executable application
Setting for the iNode client generator.
Select Advanced..
Client OK.
Click Finish.
Finally restart the system and the iNode client is available.
Key Configuration
Not involved.