After the UIS server is powered off abnormally, the reverse recovery plan reports an error and the SRA command cannot be executed.
2025-06-26 10:56:49
Published
- 0 Followed
- 0Collected ，6Browsed
Network Topology
None
Problem Description
After the customer"s existing network SRM server abnormally loses power, the reverse recovery plan reports an error and the SRA command cannot be executed.
Process Analysis
After the power outage in the equipment room, problems occurred after the two ends replicated the network and port connectivity
Solution
After checking the connectivity of the replication network and ports at both ends, the problem was solved.
1. CVM management ip, 8080, 443, 80, 8443
2. Asynchronous remote replication network segment and corresponding listening port .
3. Onestor ip: 10001 Note: 2 direction from DR to Production, Production to DR, Then