★ A certain site reported that the NVME disks of the R4900 G6 server cannot be configured for RAID.
2025-06-26 11:13:29
Published
- 0 Followed
- 0Collected ，33Browsed
Network Topology
Not involved
Problem Description
Customer deploying R4900-G6 server with the RAID-5 configuration but cannot create a logical volume via VROC configuration
Process Analysis
From the screenshot, the key for VROC has not been purchased. After purchasing, configure it according to the following steps.
Solution
From the information on the official website, it is found that for NVME hard drives to do RAID, an NVME RONC key is required. The key needs to be purchased and then configured.
Support - 04-Configuring an NVMe VROC module- H3C
