The device reported an error of snmp read community error when clicking the test button to modify the snmp parameter tab

The SNMP read/write community has been acknowledged as correct; error interface:

1. Acknowledge IMC read/write parameter configuration
Method 1: Check the read/write community string configuration through jserver logs

Method 2: Check the read/write community string configuration through packet capture information

The acknowledged value is the specific configuration on the IMC side. IMC uses this value for validation when writing via SNMP to the device

2. Use the parameters obtained from log query or packet capture to check the device and confirm no abnormalities

3. View specific packet capture

[Test] The button principle is to read this MIB from the device side; packet capture can acknowledge that the device side implements this MIB, and reports an error SNMP read community configuration error.

To enable trap alarm for this device, import mib in the trap definition list under the trap management tab on the alarm page.
If the import fails, manually enter the trap.
https://zhiliao.h3c.com/Theme/details/692