MARVELL RAID controller not identified in Secure Boot mode
- RAID
- BIOS parameter tuning
- Physical Servers
- H3C rack series
- H3C blade series
- H3C GPU server series
- H3C tower series
2026-01-18 14:47:00
Published
- 0 Followed
- 0Collected ，11Browsed
Network Topology
H3C server with MARVELL RAID controller
Problem Description
If Secure Boot is enabled in BIOS, the RAID-MARVELL-M.2 raid card cannot be identified, but works normally after disabling it. Initially, the system was installed with RAID configured without enabling Secure Boot, but after enabling Secure Boot, the raid card could no longer be identified, and the system failed to boot. Other on-site device configurations, such as the LSI-9560 raid card, are unaffected by this issue.
Process Analysis
RAID-MARVELL-M.2The RAID controller does not support Secure Boot and will not be modified in the future
Solution
The configuration limitation cannot be resolved. The only options are to disable Secure Boot or replace the RAID controller