SecPath F5030-6GW-G(V7) low temperature alarm
2025-03-31 11:10:28
Published
- 0 Followed
- 0Collected ，340Browsed
Problem Description
Device temperature low alarm, no impact on service.
Process Analysis
Check if the temperature is 0
Verify whether the equipment room is a standard equipment room and if the temperature is normal
Solution
Apply for a blanking period to restart the device. If recovery is successful, there will be no impact, likely indicating an I2C controller (CTL) fault. If recovery fails, it suggests an I2C controller (CTL) hardware (HW) failure, requiring replacement parts.