CR16010-F acts as BRAS, unable to assign address pool via RADIUS after 1X authentication
2025-12-18 14:47:54
Published
- 0 Followed
- 0Collected ，10Browsed
Problem Description
debug radius shows that the radius server has delivered the address pool attribute Framed-Pool (88), but the actual user still uses the address pool configured in the previous domain.
Process Analysis
If the address pool configuration of the previous domain is deleted, users will not be able to obtain addresses from the pool.
Solution
Delete the address pool in the front domain and configure 802.1X authentication priority “ip subscriber authentication-method dot1x high-priority” under the interface