Issue of CPLD version changing to 3.0 after replacing the main control spare part for firewall F5000-CN30-D
- Other hardware related
- Firewall M9000 Series, M9000-S Series, M9000-X Series, M9000-AI Series
- NGFW Firewall
2025-06-21 00:06:15
Published
- 0 Followed
- 0Collected ，128Browsed
Network Topology
Not involved
Problem Description
Replace the MPU. After replacement, it was found that the CPLD version of the new MPU does not match that of the old MPU on the device.
Process Analysis
The CPLD version is factory-burned into the hardware (HW)
It is irrelevant to the version and requires no attention
Solution
No need to follow