WX5840X 1+1 license sharing group AP excess kicked out (independent counting on both sides)

2026-10-19 14:32:45 Published
  • 0 Followed
  • 0Collected ,1Browsed

Network Topology

AC1 license count: 1024 | AC2 license count: 2261 | Shared group total: 3285 

Dual AC license shared group remains continuously online, with no disruption.


Problem Description

On-site feedback: APs are offline, all due to License insufficient.

Alarm key screenshot:


Process Analysis

1. Check that the remaining AC license is sufficient.

  • AC1 remaining (key field of display wlan ap all)
Total number of APs: 2524 
Total number of connected APs: 2457 
Maximum supported APs: 3584 
Remaining APs: 1127 
Total AP licenses: 3285 
Local AP licenses: 3285 
Remaining local AP licenses: 861 
Sync AP licenses: 1024
  • AC2 Remaining:
Total number of APs: 3481 
Total number of connected APs: 3416 
Maximum supported APs: 3584 
Remaining APs: 168 
Total AP licenses: 3285 
Local AP licenses: 3285 
Remaining local AP licenses: 2304.50 
Sync AP licenses: 2261

2. Look at AP distribution: AC1 has 2457 APs online (mixed R/M + R/B), AC2 has 3416 APs online.
3. Check AP uniqueness: after deduplicating by serial number, the globally unique online AP count = 3418, which already exceeds the total license sync group quota of 3285. 
4. Check kick reasons: the remaining APs, during repeated attempts to come online on both sides, were kicked off by their respective ACs due to "insufficient license".

Solution

  1. Expand AC license quantity — the fundamental solution: Assess the total number of on-site APs (including redundancy planning) + 1+1 dual-link switchover reservation capacity. Raise the license sync group's total upper limit to accommodate the AP count that "could all fall on any single AC" (generally estimated as max(APs online on a single AC) × 1.2). 
  2. Standardize AP registration relationships — secondary but mandatory: In dual-link networking, ensure AC1 is the default primary and AC2 serves only as backup. Disable AP autodiscovery on AC2 (disable wlan ap discovery + static neighbors). Avoid "mutual primary-backup" causing R/M and B/M to switch back and forth between the two ACs.  
Please rate this case:   
0 Comments

No Comments

Add Comments:

✖