WX2860X standalone, Release 5822P12;
Wireless centralized forwarding + AC built-in local Portal authentication (guest authentication)
Use AC's built-in local Portal authentication (centralized forwarding) for guest authentication. The terminal can redirect normally and open the Portal page, but after entering the account and password, it always prompts "System busy, please try again later."
The STA belongs to VLAN 7, with an IP range of 192.168.188.0/24 and a gateway of 192.168.188.253 (an SDWAN device).
AC-side interface addresses: Vlan-interface7 = 192.168.188.254 (same subnet as the terminals)
Vlan-interface4094 = 10.40.94.1 (used as the Portal authentication page address, with a mask of 255.255.252.0)
Key Configuration:
#
interface Vlan-interface4094
ip address 10.40.94.1 255.255.252.0
wlan service-template test
ssid test
vlan 7
portal enable method direct
portal domain portal
portal apply web-server
portaltest service-template enable
portal web-server portaltest url http://10.40.94.1/portal
portal local-web-server http
default-logon-page defaultfile.zip
portal local-web-server https
default-logon-page defaultfile.zip
#
1. Enable debug portal all to capture authentication interactions. Key logs are as follows:
%Aug 6 10:29:20:532 2026 AC PORTAL/6/PORTAL_USER_REDIRECT: -UserIP=192.168.188.203-UserMAC=68-xx-xx-xx-1F-C2-SSID=test-PortalIP=10.40.94.1; Send redirection. ...
*Aug 6 10:29:21:200 2026 AC PORTAL/7/EVENT: Received a new user request connection
*Aug 6 10:29:21:201 2026 AC PORTAL/7/EVENT: Received HTTP GET method packet.
*Aug 6 10:29:21:201 2026 AC PORTAL/7/EVENT: Request for /portal/.
*Aug 6 10:29:21:201 2026 AC PORTAL/7/ERROR: Failed to get wlan snooping.Userip:192.168.188.253 *Aug 6 10:29:21:201 2026 AC PORTAL/7/ERROR: Failed to get dhcp snooping.Userip:192.168.188.253
*Aug 6 10:29:21:201 2026 AC PORTAL/7/ERROR: Failed to get ifindex from IPCIM.user IP=192.168.188.253
*Aug 6 10:29:21:201 2026 AC PORTAL/7/ERROR: Failed to get ssid by user mac, user MAC:94-xx-xx-xx-E4-50.
2. Core suspicion: The terminal initiating Portal authentication was originally 192.168.188.203 / 68-xx-xx-xx-1F-C2 accessing 10.40.94.1; however, in the packets that actually initiated the authentication interaction, the source IP changed to 192.168.188.253. No corresponding terminal information for 192.168.188.253 can be found in any WLAN-related channel (wlan snooping / dhcp snooping / ifindex / ssid) on the AC. 3. When executing display portal auth-error-record all, all newly added authentication failure records come from 192.168.188.253.
4. Based on the basic environment: 192.168.188.253 is exactly the gateway for wireless terminals (an SDWAN device). Since the terminal's access to 10.40.94.1 involves Layer 3 packets, it must be forwarded through this SDWAN gateway; it is suspected that this device performs a NAT-like source IP rewrite when forwarding authentication traffic, changing the source IP to the gateway's own address.
1. Root cause: When AC performs Portal authentication, it looks up the terminal's basic information (wlan snooping / dhcp snooping / ifindex / ssid, etc.) based on the source IP of the authentication packet. Only when a real WLAN terminal is found can subsequent authentication proceed; if not found, it is determined to be a spoofing/attack risk and authentication is directly terminated, with the page showing "System busy, please try again later."
2. Solution: Change the AC's Portal authentication address to 192.168.188.254 (i.e., AC's Vlan-interface7, on the same subnet as the terminals).