Wireless Advanced Optimization Feature - Upstream ARP Suppression?

• wlan optimization

AP broadcast and multicast suppression function?

• wlan optimization

Which configurations will affect the VLAN changes of wireless Layer 3 roaming terminal?

• wlan optimization

The official website of a certain AP states that the maximum power is 20dbm, but the available parameter range when configuring max-power in the AP RF view shows as 1-12dbm?

• wlan optimization

What is the difference between Layer 2 isolation under the wireless service template and Layer 2 isolation under the global setting?

• wlan optimization

The use of packet testing software can lead to significant discrepancies in upstream and downstream testing when evaluating APs.

• wlan optimization

Experience Case of dealing with the problem of network lag when accessing Huawei Cloud\'s HTTP service

• wlan optimization

Experience Case SSID deauthentication time optimization.

• wlan optimization

Typical Configuration of v7 Wireless Forwarding Policy Feature.

• wlan optimization

Bonjour enabled terminals are unable to discover each other

• wlan optimization

Experience Case Study for Packet Loss Issue on PIS System of a Metro Network.

• wlan optimization

General troubleshooting for unstable wireless SSID signals.

• wlan optimization

Case on solving the problem of being unable to access a specific address after passing authentication on a certain location\'s portal.

• Portal

When connecting to the third-party server for remote Portal authentication, there was a character conversion issue that caused the page to redirect forcefully

• Portal

There are issues with portal authentication and ACK_AUTH message of the portal server on WX5510E at a certain location.

• Portal

XAC combined with WBC Local Cloudnet for fixed account authentication, cannot pop up the portal authentication screen?

• Portal

What is the priority of web-server and portal web-server escape for V7 primary and backup portals?

• Portal

When does a portal escape need to issue a DNS configuration to an AP?

• Portal

When doing the portal authentication function you will often see configuration guidance with idle-cut values that are recommended to be configured. For example: [AC-V7-isp-1]authorization-attribute idle-cut 10 10240 What do the 10 and 10240 in it mean? How are these two values configured?

• Portal

When using normal portal authentication, mac-trigger awareness does not take effect.

• Portal