When a wireless user accesses the network through IPv6, if the user’s IPv6 address adopts stateless address allocation, there may be cases where the wireless user will apply for IPv6 addresses in two different network segments at the same time after Layer 3 roaming. There may be anomalies in wireless users communicating using IPv6.

• IPv6

Does the AP with 128M small memory support IPV6?

• IPv6

Why can't the terminal use the IPv6 address prefixed with 64 starting with 2002?

• IPv6

Does V7 AC PPPOE dial-up support IPv6?

• IPv6

In a pure IPv6 network, why can't the Android terminal discover the address statelessly?

• DHCPv6

In IPv6 networking, why can only 64-bit prefixes be configured in stateless address discovery mode?

• IPv6

How to configure NVMe SSD RAID through VROC

• BIOS
• RAID

Google phone can not do 802.1x authentication on cloudnet

• Cloud-Net

⭐Cloud authentication after logout no need re-authentication

• Cloud-Net

⭐Cloudnet authentication page shows your connection is not private

• Cloud-Net

The terminal network is sometimes disconnected

• wlan access
• General

★ QoS remark local-precedence setting not working on switch S6520X-54QC-EI

• QoS

★ FIST failed to install the operating system

• iFIST

WX2860X cannot integrate with a third-party captive portal/ AAA server to complete portal authentication

• Portal
• AAA

★ ★ IMC configures the device telnet login user and authorizes the user role

• iMC EIA
• Telnet
• AAA

★ ★ When the router has multiple ISP egress links, how to detect the link status and implement link switching

• NQA
• Track

★ WX2860X integrate with a third-party captive portal/ AAA server,but portal serverneed to trigger authentication request twice before the AC actually perform access-request with AAA

• Portal
• AAA

★ WX2860X cannot integrate with a third-party captive portal/ AAA server to forces portal users to go offline

• Portal
• AAA

How to configure the WIPS countermeasure function

• WIPS

Server red screen failure

• HDM
• Firmware