After the UIS server is powered off abnormally, the reverse recovery plan reports an error and the SRA command cannot be executed.

• Cloud host

★ The status of the SRM asynchronous remote replication pair is displayed as Failure

• Cloud host

Three nodes of ADDC controller (CTL) turn red

• ADDCSolution

ADWAN7.1 scheduling issue: under excessive load conditions, high precedence services may also be scheduled away

• ADWANSolution

ADDC manually managed device, device displays openflow connection fail

• ADDCSolution

AD Campus wireless non-authenticated terminals cannot obtain an address

• ADCampusSolution

ADDC device automation online cannot obtain address

• ADDCSolution

Firewall bidirectional NAT traffic after entering IPSec scenario simulation test

• IPSec VPN
• NGFW Firewall

Some overseas wifi7 clients cannot search for 6GHz wireless signals

• wlan access
• V7 AC
• General

The sub-interface IP is reset after the IPRAN device restarts

• IP-RAN
• IPRAN Series

Switch cannot re-authenticate when Radius server sends terminal session

• 802.1X
• General

Typical configuration of IKEv2-based IPsec tunnels across VPN instances

• IPSec VPN
• VRF
• NGFW Firewall

rasdaemon process log take all the root path space

• Cloud host

UIS Cannot obtain the Onestor did file

• Cloud host

Transparent DNS proxy configuration examples

• Outbound link load balancing
• NGFW Firewall
• Load balancing

Experience case of registration fail prompt after uploading installation package in ADNET 7.1 solution

• AD-NETSolution

Experience case of SDWAN TTE connection failure at a certain site

• ADWAN branch solution

A classic case of network device page prompting device authorization expiration or insufficiency at an ADCampus site

• ADCampusSolution

The clock interval between dual DHCP Servers in the ADcampus environment exceeds 1 minute, causing terminals to fail to obtain an IP address

• ADCampusSolution
• Windows system installation

Wireless terminal occasionally loses network connection, and the Windows system WLAN report shows the reason for disconnection as "No Address"

• wlan access
• Cloudnet